Monitoring, incident management and infrastructure terminology
Knowledge Base
Concepts in infrastructure monitoring mean different things to different teams. This knowledge base defines the terms Sentry uses in plain English, explains why each one matters, and clearly shows how it relates to the product. This content is a reference document, not a sales pitch.
Definitions reflect general industry knowledge. A concept appearing here does not mean it is supported for every device, vendor, or protocol.
Guides
Practical, step-by-step guides
Each guide covers one topic end to end, and states clearly what is out of scope.
- What is infrastructure monitoring, and how should it be designed? The layers of infrastructure monitoring, which question each check answers, and how a healthy monitoring setup is designed.
- Network discovery and inventory: an unseen device cannot be monitored The path from subnet definition to device inventory; discovery candidates, confidence scores, and why the approval step stays with the operator.
- Incident management: root incident, affected incident, and alarm noise How a signal turns into an incident, why the root/affected distinction is critical, and practices that reduce alert fatigue.
- Operational syslog: correlating records with incidents How the syslog stream is collected, how it is matched with check results, and how this differs from a SIEM.
- AI-assisted incident analysis: separating findings from hypotheses How the incident summary, probable causes and troubleshooting steps are produced, and why autonomous intervention is not performed.
- Certificate and domain monitoring: preventable outages Why SSL/TLS and domain expiry outages are entirely preventable, and how the tracking setup works.
- What is ping? What an ICMP check tells you, and what it doesn't What ping actually measures, how to read response time and packet loss, and why a service can still be down while ping succeeds.
- What is RADIUS? Why the authentication service needs monitoring What RADIUS does, why users say 'the internet is down' when authentication fails, and how this service is monitored.
- Zabbix, Nagios and open-source monitoring: strengths and friction points What common open-source monitoring tools do well, where teams struggle in practice, and the questions worth asking when evaluating a tool.
- What is DNS? Domain name resolution and why monitoring it matters What DNS does, how a domain name is resolved step by step, how DNS problems show up in the field, and how resolution is monitored.
- What is a port? Monitoring services with TCP port checks What a port is, what a TCP port check actually tells you, how it differs from ping, and which check answers which question.
- What is an SSL certificate? Why expiry tracking gets missed What an SSL/TLS certificate does, what happens when it expires, why renewals are missed, and how expiry dates are tracked.
- What is SNMP? The basis of reading data from network devices What SNMP is, what OIDs and MIBs mean, how the versions differ, and how network devices are monitored with SNMP.
- What is an IP address? How addressing works on a network What an IP address is, static versus dynamic addressing, private and public ranges, and the addressing problems seen most often in the field.
- What is a VLAN? Splitting one network into safe segments What a VLAN does, access versus trunk ports, why checkout and guest traffic should be separated, and the faults VLANs typically cause.
- What is MTU? Why ping works but file transfers stall What MTU is, how fragmentation works, why VPN and PPPoE links lower it, and how to find the right value.
- What is MQTT? Why sensor data stops quietly How MQTT works, what brokers, topics and QoS levels mean, and how to notice that a data flow has stopped on the plant floor.
Categories
How are terms grouped?
Every term in the glossary belongs to one of these categories.
-
Network and infrastructure
Addressing, discovery, inventory and topology concepts.
7 terms -
Monitoring and control
Check types that measure availability and service health.
10 terms -
Incident management
The process by which a signal becomes an incident, and an incident becomes a resolution.
11 terms -
Logs and data
How syslog and record data is collected, read and correlated.
2 terms -
Certificates and access
Certificate, domain and authentication checks.
4 terms -
AI and analysis
How incident summaries, probable causes and operator suggestions are produced.
6 terms
FAQ
About the knowledge base
Is the knowledge base content a product promise?
No. The definitions reflect general industry knowledge. What Sentry actually does is stated separately for each term; out-of-scope topics are explicitly noted.
Does Sentry fix problems automatically?
No. It produces analysis and suggestions; the decision on any step that could cause an outage belongs to the operator.
Can I monitor devices on a private network?
This generally requires a local connectivity component installed inside the network. Requirements and timing depend on your environment; no commitment is given without verification.
Is this a SIEM?
No. Syslog records are used for operational diagnosis; security correlation and legal log compliance are out of scope.
Demo request
Get in touch
Tell us about your environment and the targets you want to monitor; let's work out the right setup method and pricing together.
A monitoring plan that fits your needs
- 01Number of targets to monitor
- 02Check types and frequency
- 03Usage needs
Email: sales@mintyfi.com