Request a demo

Guide · Monitoring and control

What is ping? What an ICMP check tells you, and what it doesn't

What ping actually measures, how to read response time and packet loss, and why a service can still be down while ping succeeds.

What ping does

Ping is the most basic reachability check: it sends an ICMP echo request to an address and waits for a reply. A reply means the target is up and the network path works; no reply only tells you that this address did not answer ICMP.

Ping's value comes from its speed. It returns a result in seconds, puts almost no load on the network, and can therefore run frequently. The first sign of an outage usually comes from here.

Reading response time and packet loss

A single high response time says little; the trend is what matters. Response time creeping up over days on the same target usually points to link saturation, new load, or a path change.

Packet loss is the clearest trace of intermittent problems. A few percent goes unnoticed on a web page, but is felt directly in voice, video, and field sensor traffic.

  • Consistently high latency: path or link capacity
  • Latency spiking and returning to normal: momentary congestion
  • Intermittent packet loss: cabling, interface errors, or wireless interference
  • No response at all: device down, path broken, or ICMP disabled

Ping succeeds but the service is down

This is the most common situation in the field. The server answers ping because the operating system is up, while the application on it is not responding. That is why ping alone is not sufficient monitoring.

The right setup layers checks on the same target: ping verifies the address, a TCP port check verifies whether the service is listening, and a REST check verifies the response a user actually receives. Where those three disagree tells you which layer the problem sits in.

What if ICMP is blocked?

Some firewalls and server policies block ICMP. Ping then looks permanently failed even though nothing is wrong with the device. For such targets, measuring reachability with a TCP port check is more accurate.

In Sentry, which check type applies to a target is set by the monitoring template; for devices closed to ICMP, a port or service check is defined instead of ping.

Related terms

FAQ

How often should ping run?

Minute-level intervals are common for critical targets. Ping is a light check; the real driver is how late you are willing to learn about an outage.

Does high ping response time mean there is an outage?

No. High latency is a symptom, not an outage. To see whether users are affected, look at service and application layer checks.

Can ping measure bandwidth?

No. Ping reports latency and packet loss; capacity measurement is a different job.

Demo request

Get in touch

Tell us about your environment and the targets you want to monitor; let's work out the right setup method and pricing together.

A monitoring plan that fits your needs

  1. 01Number of targets to monitor
  2. 02Check types and frequency
  3. 03Usage needs

Email: sales@mintyfi.com

Leave your details

We use cookies for visit statistics. Cookie policy