What is an IP address?
An IP address is a device's address on a network. A checkout terminal, camera or server can only receive traffic while it holds an address. Without one, or with the wrong one, the device is invisible on the network even though it is physically plugged in.
The common format is IPv4: four numbers separated by dots, such as 192.168.10.25. Because addresses are running out, IPv6 is spreading too; both versions can coexist on the same network.
- 1
The device joins the network
- 2
It requests an address from DHCP
- 3
Address, subnet mask and gateway are assigned
- 4
The lease is renewed before it expires
If a lease is not renewed, or two devices get the same address, the connection looks intermittent.
Static or dynamic?
A dynamic address is handed out automatically by a DHCP server when the device joins, and is valid for a lease period. A static address is set manually and does not change.
The practical rule: laptops and phones can be dynamic, but anything monitored or referenced in a rule (printer, camera, checkout, switch, server) should hold a fixed address. Otherwise monitoring ends up checking a different device one day.
- Dynamic: user devices, guest network
- Static or DHCP reservation: servers, cameras, checkouts, network gear
- A reservation is the more manageable form of a static address
Private versus public addresses
The ranges 10.x.x.x, 172.16–31.x.x and 192.168.x.x are private; they only mean something inside your own network and cannot be reached directly from the internet. Public addresses are unique on the internet.
This matters for monitoring: a device that lives only on a private network cannot be checked from outside. That requires a local connectivity component installed inside the network; requirements and timing depend on your environment.
The addressing problems seen most often
A large share of faults happen not because hardware broke, but because addressing was wrong. These three top the list.
In Sentry, devices are inventoried with their addresses, reachability checks run on a schedule, and an incident opens when an address stops answering. Address allocation, DHCP management and device configuration are out of scope.
- IP conflict: two devices share one address, the link becomes intermittent
- Lease expiry: DHCP renewal fails and the device loses its address
- Wrong gateway or mask: the device sees its own network but cannot get out
- Address change: a supposedly static device moves, monitoring keeps checking the old address